Description
Hydranautics SWC5 Max RO Membrane
PFI Watermaker adalah importir distributor agen dan supplier Hydranautics SWC5 Max RO Membrane terlengkap menyediakan berbagai kebutuhan spare part water treatment untuk keperluan industri dengan kualitas dan harga terbaik.
Info lengkap produk Hydranautics RO Membrane
Description Hydranautics SWC5 Max Membrane
General Product Description
Configuration : Spiral Wound
Membrane Polymer : Composite Polyamide
Membrane Active Area : 440 ft2 (40.9 m2)
SWC5 membranes provide optimum salt rejection and permeate flows. They are chosen when lower permeate TDS and lower feed pressures are needed. SWC5 membranes offer highest energy efficiency at lowest costs and are used in mega desalination plants. SWC5 membranes are available in two different types of variants, LD and MAX
Low differential LD Technology® models are offered to minimize colloidal fouling when used with conventional pre-treatment equipment. They offer consistently low feed pressures and highest duration between two successive cleanings.
The MAX models have a 440 ft2 (40.9 m2) active membrane surface area. They provide excellent performance with high TDS and boron removal from warm waters.
Specified Performance
- Permeate Flow : 9,900 gpd (37.5 m3/d)
- Salt Rejection : 99.8% (99.7% minimum)
- Test Conditions : 32000 ppm NaCl solution
- 800 psig (5.5 MPa) Applied Pressure
- 77 oF (25 oC) Operating Temperature
- 10% Permeate Recovery
- 5 – 7.0 pH Range
The Specified Performance is based on data taken after a minimum of 10 minutes of operation. Actual testing of elements may be done at conditions which vary from these exact values; in which case, the performance is normalized back to these standard conditions. Permeate flow for individual elements may vary ±15 percent from the value specified.
Product Use and Restrictions
- Maximum Applied Pressure : 1200 psig (8.27 MPa)
- Chlorine Concentration Maximum : < 0.1 ppm
- Maximum Operating Temperature : 113 oF (45 oC)
- pH Range, Continuous (Cleaning) : 2-11 (1-13)
- Maximum Feedwater Turbidity : 1.0 NTU
- Feedwater SDI (15 mins) Maximum : 5.0
- Maximum Feed Flow : 75 gpm (17.0 m3/h)
- Brine Flow Minimum : 12 gpm (2.7.0 m3/h)
- Maximum Pressure Drop for Each Element : 15 psi (0.10 MPa)
Untuk informasi lengkap dan permintaan penawaran Hydranautics SWC5 Max RO Membrane silahkan hubungi kantor kami
Alamat dan kontak
PT PROFILTER INDONESIA
Ruko Blok G/54 – Gudang A/01
Jl.Canadian Broadway
Pergudangan Commpark – Kotawisata – Cibubur
Kantor : +6221 84937329 , 84937805
Mobile : 081385066789
Email : sales@profilterindonesia.com
